The Virtual Repairman's Appliance Help

oven door

Virtual Repairman — Fri Apr 04, 2008 12:17 pm

Author: Virtual Repairman

Posted: Fri Apr 04, 2008 12:17 pm

Ok, so there are 2 screws on the inner door liner that you must remove to slide the door off on this model. Tell you what...I'm going to provide you with a copy of the official Accellis 2X Service Manual. You can figure it all out in no time.

(You might remove that "help me" from your signature....it looks silly. We help everyone)

Maytag Oven door

Jleland — Fri Apr 04, 2008 7:06 am

Author: Jleland

Posted: Fri Apr 04, 2008 7:06 am

Ok, I couldn't get the door off. I pulled hard enough to lift the oven off the floor and it wouldn't budge. Is there a release I should be pushing or something?

Re: Maytag Accellis Range door handle broken

Jleland — Thu Apr 03, 2008 1:35 pm

Author: Jleland

Posted: Thu Apr 03, 2008 1:35 pm

Thanks so much, I will give it try!

door handle

Virtual Repairman — Thu Apr 03, 2008 1:31 pm

Author: Virtual Repairman

Posted: Thu Apr 03, 2008 1:31 pm

Getting this off could not be easier. You simply open the door to the first broil position, where it will stop. Lift the door by both sides and it will slip off the hinges and you can lay it carefully on a rug or towel. Yes, of course you will have to take the top and bottom screws out to separate the 2 halves, then a barrier panel inside will be removed to see the mounting screws for the handle. It's just a few screws, really. Type the model MER675OAAB into our parts lookup for a blowup of the door itself.

Maytag Accellis Range door handle broken

Jleland — Thu Apr 03, 2008 12:38 pm

Author: Jleland

Posted: Thu Apr 03, 2008 12:38 pm

Mine is a modle MER 675OAAB serial number 12248071YU range. My handle broke and am worried about tearing the whoel door apart. Is that what i need to do? And do you know how to get the door off the oven, it would be easier to work on if it were off. Thanks!