The Virtual Repairman's Appliance Help

dispenser

Virtual Repairman — Mon Aug 04, 2008 8:34 pm

Author: Virtual Repairman

Posted: Mon Aug 04, 2008 8:34 pm

It is not a matter of being clogged. Your dispenser is broken. It is electronically activated from behind, as seen in the picture below. You only have to remove the outer door panel to replace the dispenser, which comes as a modular unit. If you don't have access to parts, you can click the graphic below to order.

KitchenAid rinse-aid clogged

NewsMom — Mon Aug 04, 2008 8:22 pm

Author: NewsMom

Posted: Mon Aug 04, 2008 8:22 pm

My KitchenAid dishwasher (KUDR24SEwh1) won't accept more than a drop or 2 of rinse-aid these days. The fill window is nearly dark (indicating that there is rinse-aid in that compartment).

I've tried using a paperclip to poke around the fill hole, but there's no obvious (or accessible) clog.

Suggestions?