 |
The Virtual Repairman's Appliance Help
It's only expensive if someone else fixes it for you
|
| View previous topic :: View next topic |
| Author |
Message |
NewsMom
Apprentice DIYer
Joined: 04 Aug 2008
Posts: 1
|
 Posted: Mon Aug 04, 2008 8:22 pm Post subject: KitchenAid rinse-aid clogged |
 |
|
My KitchenAid dishwasher (KUDR24SEwh1) won't accept more than a drop or 2 of rinse-aid these days. The fill window is nearly dark (indicating that there is rinse-aid in that compartment).
I've tried using a paperclip to poke around the fill hole, but there's no obvious (or accessible) clog.
Suggestions? |
|
| Back to top |
|
 |
Virtual Repairman
Site Admin
Joined: 06 Jul 1999
Posts: 4627
Location: Austin, TX
|
| Posted: Mon Aug 04, 2008 8:34 pm Post subject: dispenser |
|
|
It is not a matter of being clogged. Your dispenser is broken. It is electronically activated from behind, as seen in the picture below. You only have to remove the outer door panel to replace the dispenser, which comes as a modular unit. If you don't have access to parts, you can click the graphic below to order.
 
_________________
FAST-MOVING PARTS | Ask the Repairman |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Please use the parts links below to support this website and keep this help free!
Any part ordered from my affiliate links can always be returned if it does not fix the problem!
Start your search here:
Diagram Search- Enter first 5 digits of model to see choices-
Powered by phpBB and The Virtual Repairman Copyright 2011 All Rights Reserved
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
