 |
The Virtual Repairman's Appliance Help It's only expensive if someone else fixes it for you
|
| View previous topic :: View next topic |
| Author |
Message |
andrew G Apprentice DIYer
Joined: 08 Sep 2009 Posts: 2
|
Posted: Tue Sep 08, 2009 1:42 pm Post subject: GE light issues |
|
|
I was given a GE spacemaker over the range micro. made in 91
the surface lights were blown so I replaced them.. they will not shut off or change to bright lights. when i pulled the old ones out, they were very discolored, almost silvery black looking. maybe something shorted?
please advise what part i will need and if its worth repairing.. Thank You |
|
| Back to top |
|
 |
Virtual Repairman Site Admin
Joined: 06 Jul 1999 Posts: 4627 Location: Austin, TX
|
Posted: Tue Sep 08, 2009 1:45 pm Post subject: micro |
|
|
Kinda hard to research a part without the complete model number, thanks. _________________ FAST-MOVING PARTS | Ask the Repairman |
|
| Back to top |
|
 |
andrew G Apprentice DIYer
Joined: 08 Sep 2009 Posts: 2
|
Posted: Tue Sep 08, 2009 1:46 pm Post subject: Re: micro |
|
|
| Virtual Repairman wrote: | | Kinda hard to research a part without the complete model number, thanks. |
sorry, it's the JVM1650bb 005 model |
|
| Back to top |
|
 |
Virtual Repairman Site Admin
Joined: 06 Jul 1999 Posts: 4627 Location: Austin, TX
|
Posted: Tue Sep 08, 2009 1:51 pm Post subject: micro |
|
|
The light circuit is controlled by the same board which does everything else, and yours is bad. I certainly feel that $120 is OK to spend unless you just want a new microwave. The board for your model is shown below and you may click to order:
Control Board-
 _________________ FAST-MOVING PARTS | Ask the Repairman |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Please use the parts links below to support this website and keep this help free!
Any part ordered from my affiliate links can always be returned if it does not fix the problem!
Start your search here:

Diagram Search- Enter first 5 digits of model to see choices-
Powered by phpBB and The Virtual Repairman Copyright 2011 All Rights Reserved
|